The strainer post are used at the beginning and end of the fence. They hold the strain of the fence wires and support any gates.
Based on 0 reviews
Be the first to review “Strainer Posts” Cancel reply
Related products
-
Electric Fence
Nemtek Wizord 4i Energizer
0 out of 5(0)- High voltage monitor will alarm when the live wires are tampered with
- Earth wire monitor will alarm when the earth wires are tampered with
- Easy to use tag switch for controlling the unit
- Can be upgraded to a Merlin 4 energizer
- Connectable to an armed response radio
- Gate monitor input monitors the position of the gate to indicate if the gate is open
- Lightning and power surge suppression built in to reduce the possibility of damage due to power surges
- Battery backup system in case of power failure
- Intelligent power saving to extend the battery life and save energy
- Siren and strobe outputs to indicate fence condition
- Typical energy output into 500 ohms load (Joules) : 3.7J
- Output voltage into an open circuit :8000V
- Number of high voltage monitored zones : 1
- Number of earth loop monitored zones : 1
- Adaptive power technology (APT), reducing false alarms and arcing on the fence : No
- Fence Interference detection from foreign energizers : Yes
SKU: n/a -
Electric Fence
High Tensile Wire 2.5mm
0 out of 5(0)High Tensile plain wire supplied on a 50kg coil. It is a 1200 linear meters. It one of the best when it comes I electric fencing.
The HT fencing line wire is used by professional fencing contractors that require an extra strength galvanized 12gauge line wire for stock fencing, chain link fencing or rabbit netting.
During the wire manufactured, the wire is tensioned producing a wire with more strength than standard plain wire.
We have the latest and most quality high tensile galvanized ht wire 2.5mm 1200m.
SKU: n/a -
Electric Fence
Hammer Energizer EZ 630
0 out of 5(0)1. 4 joule energizer
2. High Voltage live line monitoring with alarm
3. Gate (Auxiliary) monitoring with alarm
4. Siren And Strobe Output Connections
5. Connectable to an armed response radio
6. Easy to use on/off reset key
7. Remote control option
8. Battery Backup
9. Monitors the fence return voltage (single zone)
10. Remote control option
11. Alarms on low voltage threshold
12. Powers up to 2Km of fence wire (1mm)
13. 4 Joule and 10KV maximum output
14. Powers up to 2Km of fence wire (1mm)SKU: n/a
There are no reviews yet.